When you deploy your UCS environment once of the first things you will want to do is integrate it into your monitoring system. One way is through integrating with syslog. Here are some notes and tips.
Severity | Code | ID | Affected object | Cause | Last Transition | Description
major | F0207 | 225741 | sys/chassis-1/blade-4/adaptor-1/host-fc-2/fault-F0207 | link-down | 2010-07-28T12:18:59 | Adapter host interface 1/4/1/2 link state: down
Adapter [transport] host interface [chassisId]/[slotId]/[id]/[id] link state: [linkState]
This fault typically occurs as a result of one of the following issues:
•The fabric interconnect is in End-Host mode, and all uplink ports failed.
•The server port to which the adapter is pinned failed.
•A transient error that caused the link to fail.
If you see this fault, take the following actions:
Step 1 If an uplink port is disabled, enable the port.
Step 2 If the server port to which the adapter is pinned is disabled, enable that port.
Step 3 Reacknowledge the server with the adapter that has the failed link.
Step 4 If the above actions did not resolve the issue, execute the show tech-support command and contact Cisco technical support.
Fault DetailsSeverity: majorCause: link-downmibFaultCode: 207mibFaultName: fltAdaptorHostIfLinkDownmoClass: adaptor:HostIfType: network
Jul 26 01:05:01 192.168.128.16 : 2010 Jul 26 01:08:54 EST: %LOCAL0-3-SYSTEM_MSG: [F0207][major][link-down][sys/chassis-1/blade-4/adaptor-1/host-fc-1] Adapter host interface 1/4/1/1 link state: down - svc_sam_dme
Jul 26 01:05:14 192.168.128.16 : 2010 Jul 26 01:09:07 EST: %LOCAL0-3-SYSTEM_MSG: [F0207][cleared][link-down][sys/chassis-1/blade-4/adaptor-1/host-fc-1] Adapter host interface 1/4/1/1 link state: down - svc_sam_dme